Answer:
1. First-quarter moon.
2. New moon.
3. Full moon.
4. 13 degrees.
5. 29 1/2 days.
Explanation:
A moon can be defined as the natural satellite of planet earth that shines as a result of the sun's reflected light, as it revolves around the earth from west to east in 29½ days.
1. First-quarter moon: a visible half-circle.
2. New moon: darkest phase of the moon.
3. Full moon: when the the Earth is between the sun and the moon.
4. 13 degrees: this is a measurement of how far the moon advances each day in orbit.
5. 29 1/2 days: the time the Earth must rotate to return to same position relative to the moon.
What does the universe contain?
A. Only stars and planets
B. Everything
Answer:
B
In my opinion. :)
Explanation:
An incandescent bulb is supplied with
100 J of energy every second and
transfers 5 J of energy by light
Calculate the efficiency of the bulb.
I need some help can you explain this to me please and thank you
Answer:
Efficiency = 5%
Explanation:
Given that,
Supplies energy to the bulb = 100 J
Transferred energy by the bulb = 5 J
We need to find the efficiency of the bulb. It can be given by "
[tex]\eta=\dfrac{\text{useful energy out}}{\text{useful energy in}}\times 100\\\\=\dfrac{5}{100}\times 100\\\\=5\%[/tex]
So, the efficiency of the bulb is 5%.
A ball is gently dropped from a height of 20 m. If its velocity increases uniformly at the rate of
10m s -2 , with what velocity will it strike the ground? After what time will it strike the Ground?
Answer:
The ball strikes the ground at 20 m/s after 2 seconds
Explanation:
Free Fall Motion
Any object that is being acted upon only by the force of gravity is said to be in a state of free fall.
If an object is dropped from rest in a free-falling motion, it falls with a constant acceleration called the acceleration of gravity, which value is assumed as [tex]g = 10 m/s^2[/tex].
The final velocity of a free-falling object after a time t is given by:
vf=g.t
The distance traveled by a dropped object is:
[tex]\displaystyle y=\frac{gt^2}{2}[/tex]
If we know the height h from which the object was dropped, we can find the time it takes fo hit the ground:
[tex]\displaystyle t=\sqrt{\frac{2h}{g}}[/tex]
The ball is dropped from a height of h=20 m. The time taken to strike the ground is:
[tex]\displaystyle t=\sqrt{\frac{2*20}{10}}[/tex]
t = 2 s
The velocity at which the ball strikes the ground is:
vf = 10 * 2
vf = 20 m/s
The ball strikes the ground at 20 m/s after 2 seconds
A constant force of 4.5N acts on a 7.2 kg object for 10 s what is the change in the object velocity
Answer:
The change in the object's velocity is 6.25 m/s
Explanation:
Force
According to the second Newton's law, the net force exerted by an external agent on an object of mass m is:
F = ma [1]
Where a is the acceleration of the object.
On the other hand, the equations of the Kinematics describe the motion of the object by the equation:
[tex]v_f=v_o+at\qquad\qquad[2][/tex]
Where:
vf is the final speed
vo is the initial speed
a is the acceleration
t is the time
It's given a constant force of F=4.5 N acts on an object of mass m=7.2 kg. The object has an acceleration we can calculate solving [1] for a:
[tex]a=\frac{F}{m}[/tex]
[tex]a=\frac{4.5}{7.2}=0.625[/tex]
[tex]a=0.625\ m/s^2[/tex]
It's required con compute the change of velocity (or its magnitude, the speed). From [2]:
[tex]v_f-v_o=at[/tex]
The expression at the left side is the change of speed Δv:
[tex]\Delta v=at[/tex]
Knowing the time is t=10 s:
[tex]\Delta v=0.625*10[/tex]
[tex]\Delta v=6.25\ m/s[/tex]
The change in the object's velocity is 6.25 m/s
What is the difference and a similarity between constructive interference and destructive interference?
In constructive interference, waves that are in phase will combine together and increase the amplitude. In destructive interference, waves are out of phase and cancel one another out.
When two waves occupy the same point, superposition occurs. ... Constructive interference is when two waves superimpose and the resulting wave has a higher amplitude than the previous waves. Destructive interference is when two waves superimpose and cancel each other out, leading to a lower amplitude.
2. A 50.0 kg shell was fired from a cannon at earth's surface to a
maximum height of 400. m.
a. What is the potential energy at maximum height?
b. It then fell to a height of 100. m. What was the loss of PE as
it fell?
Answer: a) 196000 Joules
b) 147000 Joules
Explanation:
a. Potential energy is the energy possessed by an object by virtue of its position.
[tex]P.E=m\times g\times h[/tex]
m= mass of object = 50.0 kg
g = acceleration due to gravity = [tex]9.8ms^{-2} [/tex]
h = height of an object = 400 m
Putting in the values we get:
[tex] P.E=50kg\times 9.8ms^{-2}\times 400m=196000kgm^2s^{-2}=196000Joules[/tex] [tex](1kgm^2s^{-2}=1Joule )[/tex]
Thus the potential energy at maximum height is 196000Joules.
b. [tex] P.E=50kg\times 9.8ms^{-2}\times 100m=49000kgm^2s^{-2}=49000Joules[/tex] [tex](1kgm^2s^{-2}=1Joule )[/tex]
Thus loss in P.E = (196000Joules-49000Joules) = 147000 Joules
You are driving at 30.0 m/s on a freeway curve of radius 25.0 m. What is the magnitude of your acceleration?
Answer:
36.0 m/s^2
Explanation:
The magnitude of your acceleration is equal to 36.0 [tex]m/s^2[/tex].
Given the following data:
Radius, r = 25.0 meters. Speed, V = 30.0 m/s.To calculate the magnitude of your acceleration:
Mathematically, the centripetal acceleration of an object is given by this formula:
[tex]A_c = \frac{V^2}{r}[/tex]
Where:
[tex]A_c[/tex] is the centripetal acceleration.r is the radius of the circular track.V is the velocity of an object.Substituting the given parameters into the formula, we have;
[tex]A_c = \frac{30.0^2}{25.0}\\\\A_c = \frac{900}{25.0}[/tex]
Centripetal acceleration = 36.0 [tex]m/s^2[/tex]
Read more on centripetal acceleration here: https://brainly.com/question/2788500
PLEASEEEE HELP MEEEEE!!!! WILL GIVE BRAINLIST!
Which point is located at (4, –2)?
On a coordinate plane, point A is 2 units to the left and 4 units up. Point B is 4 units to the right and 2 units down. Point C is 4 units to the left and 2 units up. Point D is 2 units to the right and 4 units down.
A
B
C
D
Answer:
It is B
Explanation:
Answer:
the other guy is right im answering so you can give him brainliest have a nice day :)
Explanation:
How do you write the formula of metal elements
Which statement best describes balancing equations and the law of conservation of mass?
There are more atoms in the reactants than in the products, and the total mass is the same in the reactants and in the products.
The number of atoms is the same in the reactants and in the products, and the total mass is the same in the reactants and in the products.
There are fewer atoms in the reactants than in the products, and the total mass is less in the reactants than in the products.
There are more atoms in the reactants than in the products, and the total mass is higher in the reactants than in the products.
Answer:
it would be c, there are fewer atoms in the reactants than in the products, and the total mass is less in the reactants than in the products.
Explanation:
Answer:
ccccccccccccccccc
Explanation:
:DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
··
ω
Δ
ω
What would the products of a double-replacement reaction between Na2S
and MgF2 be?
A. NaF and MgS
B. MgF and Nas
C. F2S and MgNa2
D. MgF2 and Nas
Answer:
A. NaF and MgS
Explanation:
The reaction equation is given as:
Na₂S + MgF₂ → 2NaF + MgS
The product of this reaction is NaF and MgS.
In a double displacement reaction there is an actual exchange of partners to form new compounds. This reaction takes place between ionic compounds.
The driving force for the reaction is:
formation of an insoluble precipitateformation of water or any other non-ionizing compound liberation of a gaseous product.Suppose the driver of a vehicle applies the brakes while traveling at 8.25 m/s and the car stops after
traveling 24.0 m. What was the car's acceleration?
Answer:
15.96
Explanation:
i am the smartest rock in the box so. . . ya
The acceleration of the car if the brakes while traveling at 8.25 m/s and the car stops after traveling 24.0 m is -1.418 m / s².
What is acceleration?The term "acceleration" refers to the rate and direction at which velocity varies over time. Acceleration is the change in direction or speed of an object or points moving ahead. The frequent change in direction causes motion on a circle to rise even when the speed remains constant.
For all other motions, these effects increase acceleration. Since acceleration has both a magnitude and a direction, it is a vector quantity. Velocity is a vector quantity as well.
Given:
The distance traveled by car, d = 24 m,
The initial velocity of the car, v = 8.25 m/s,
Calculate the acceleration using the motion equation as shown below,
[tex]v^2- u^2 = 2ad[/tex]
0 - 8.25² = 2a × 24
48a = -68.06
a = -68.06 / 48
a = -1.418 m / s²
To know more about Acceleration:
https://brainly.com/question/3046924
#SPJ2
1. Two vectors have magnitudes 6 & 8 units, respectively. Find the maximum &
minimum resultant vectors.
nitsdoftboltant fuo vectors acting in the same direction is 20
Answer:
The maximum magnitude of their resultant is 14 units, and the minimum is 2 units
Explanation:
Resultant Vectors
When two or more vectors are added or subtracted, the resultant vector can be found by considering their magnitudes and directions.
Two vectors applied to the same point can produce a result that can vary from being completely collaborative or completely opposite.
If two vectors act in a collaborative form, their magnitudes are added and the result has the maximum possible magnitude. If they act in opposite directions, the result has the minimum possible magnitude.
Thus, being 6 and 8 units the magnitudes of the vectors, the maximum magnitude of their resultant is 14 units, and the minimum is 2 units.
mechanical waves apply________to push molecules in their path?
(fill in the blank)
Answer:
what is the force of gravitational attraction between an object with a mass of 100 kg and another object that has a mass of 300 kg are at a distance of 2m apart
The density of solid copper is 8960 kg/m3.
The density of molten copper is 7900 kg/m3.
Explain this difference in density by referring to the particle model and the arrangement of
atoms in the two states. (2)
Explanation:
The density of a solid copper is 8960kg/m^3 while the density of a molten copper is 7900kg/m^3 this is due to the difference in the state of matter, the solid copper is in solid state while the molten copper is in form of a liquid. In the solid copper atoms are tightly pack while they atom are not tightly packed.
what happens if you shoot a bullet in the air and lands on your head
Answer:
most of the time the bullet will not hurt you but sometimes can hurt or kill you.
the distance between pole and position of image can denoted by___
a)u. b)v. c)R. d)C
Answer:
b) v
Explanation:
the distance between pole and position of image can denoted by v
A student wants to use all of the appliances at the same time so plugs them in to a multiway socket.
The socket has a maximum safe current of 30A and the mains electricity is 230V.
a. Is it safe to use all five appliances at once?
Explain your answer showing your use of the equation
Answer:
The answer would be no
Explanation:
because the voltages are so high, we can assume that 5 appliances divided up between the voltages would not be safe to use together and would ultimately cause the circuits to overload
Which of the following is a force?
Momentum
Friction
Acceleration
Velocity
Answer:
friction
Explanation:
have you not heard frictional force?
have you ever heard momentum force or acceleration force
hope this helps. if not. please report it and let someone else try it
Twins Jody and Taylor are rearranging the furniture in their bedroom and want to move a dresser across the room. The dresser has a sliding force of 90N. Jody can push with a force of 55N and Taylor can push with a force of 38N. What is the Net Force? Can the twins move the dresser across the room? Explain why in complete sentences and show all math work to support your answer.
Plz help this is due in 5 days ;-;
Answer:
yes, They will be able to move the dresser.
Explanation:
sliding force 90N
55N + 38N = 93N
therefore, yes the twins can move the dresser
which hand is negatively charged?
A
B
C
D
Answer:
the one that has more negative sights so the first hand on your right :)
Answer:
b
Explanation:
When the velocity of an object is quadrupled , by what factor is its kinetic energy changed ?
Answer:
I believe it is 16
Explanation:
Answer:so add the momentum twice and then the kinetic energy becomes four times
Explanation:This includes to me not the factor but by what factor it’s kenetic energy changes Momentum becomes twice and kinetic energy becomes four times its original value
_____ is the sum of all potential and kinetic energy.
Group of answer choices
Law of Conservation of Energy
Gravitational Potential Energy
Stored energy
Mechanical Energy
Answer:
mechanical energyis the sum of all potential and kinetic energy.hope it helps!
3 resistors of 3,4 and 12 ohm are there. How would you connect so as to get a resistance more than 5 oh, but less than 7 ohm show using calculations and a diagram
Answer:
Connecting the 4-ohm and 12-ohm in parallel and followed by the 3-ohm resistor in series. A scheme of the configuration is attached below. Please see the file attached below to know the diagram.
Explanation:
There is the following solution that satisfies all requirements indicated on statement:
Connecting the 4-ohm and 12-ohm in parallel and followed by the 3-ohm resistor in series. A scheme of the configuration is attached below.
[tex]R = \frac{(12\,\Omega)\cdot (4\,\Omega)}{12\,\Omega+4\,\Omega}+3\,\Omega[/tex]
[tex]R = 6\,\Omega[/tex]
Which observes all design requirements.
An 8.0-kg history textbook is placed on a 1.25-m high desk. How large is the
gravitational potential energy of the textbook-Earth system relative to the
floor?
i’ll give brainliest
Answer:
GPE=98J if the given gravity is 9.8 but the gravity is 10 it will be 100J
Explanation:
GPE=mgh so m=8kg g=9.8m/s^2 or 10J h=1.25m
so GPE=8kg×9.8 or 10 m/s^2×1.25m
GPE=98J if the given gravity is 9.8 and GPE=100 if the given gravity is 10.but ask your teacher (asker) and don't forget those formula
The gravitational potential energy of an object is directly proportional to the mass of the object. The gravitational potential energy of the object is 98 Joule.
What is gravitational potential energy?The energy acquired by an object due to its vertical position or height is defined as the gravitational potential energy. This energy mainly depends on the mass and height of the object.
The greater the mass of an object, higher is the gravitational potential energy and if greater is the height of the object, more will be the gravitational energy experienced by it.
The formula used to calculate the gravitational potential energy is:
GPE = mgh
m = Mass of the object
g = Acceleration due to gravity
h = Height of the object
GPE = 8.0 × 9.8 × 1.25 = 98 Joule
Thus the gravitational potential energy is 98 Joule.
To know more about gravitational potential energy, visit;
https://brainly.com/question/19768887
#SPJ7
What else is produced during the replacement reaction of magnesium and hydrochloric acid? Mg + 2HCl H2 + ________ MgCl2 Mg2Cl2 Mg2Cl MgCl
Answer:
A
Explanation:
MgCl2
Answer:
its MgCl2
Explanation:
i got it on edge
force of 4 Newtons in 20 power output? 40 Nm/sec 2 Nm 2 Nm/sec 1
Answer:
P = 0.2 W
Explanation:
Given that,
Force, F = 4 N
Displacement, d = 1 m (say)
Time, t = 20 s
We need to find the power output. Power is the rate of doing work. So,
P = W/t
[tex]P=\dfrac{Fd}{t}\\\\P=\dfrac{4\times 1}{20}\\\\P=0.2\ W[/tex]
So, the required power is 0.2 W.
Complete the following math operations giving the answer with the correct significant digits.
510x30
Group of answer choices
15
150,000
15,000
150
Answer:
15,000
Explanation:
The intensity of a sound is another way to say the _________ of a sound.
frequency
amplitude
wavelength
loudness
Answer:
Frequency and tfcvvbyfgffhhi
Answer:
I think frequency
Explanation:
A gust of wind blowing east pushes against a ball. When will the wind do work on the ball? when the ball moves to the east when the ball moves to the north when the ball stays in one place when the ball moves north or south
Answer: when the ball moves to the east
Explanation:
Work is done when an external force makes an object move in the direction that it was forcing it to by transferring energy to it.
The wind is blowing to the east which means that it is exerting a force that is trying to move the ball to the east. For work to actually occur, the ball needs to move in the direction of the force being applied which is the east.
Answer:
simplified version of the person above me its option A
Explanation: