. The pI is called ________________. The rule of calculating pI of an amino acid is that first, write the dissociation equation from fully protonated form to fully deprotonated form, label the charge of each form; second, identify the zwitterionic form (zero charge) and find the closest pKs (left and right side in the dissociation equation); third, average these two pKs. Write the dissociation equations for amino acids, glutamate, histidine, and calculate their pIs.

Answer:

7.56 atm

Explanation:

Boyle's law states that the pressure and volume of a gas are proportional to each other

The formular for Boyle's law is

P1V1=P2V2

According to the question above, the values given are

P1=1.50 atm

P2= ?

V1=12.60 litres

V2= 2.50 litres

Let us make P2 the subject of formular

P2= P1V1/V2

P2= 1.50×12.60/2.50

P2= 18.9/2.50

P2= 7.56 atm

Hence when the volume of a gas is 2.50 litres then it's pressure is 7.56 atm

Answer: 25%

Explanation:  

1. Transmittance, T= P/P0  

Where P = light exiting the cell

           P0 = light entering the cell

Therefore %T =  P/P0 ×100

           = 50/200×100

=25%

2. Absorbance, A= -log(T)

But T= 0.25

Therefore A= -log(0.25)

                  = 0.6020

Answer:

[tex]Q=-361.56kJ[/tex]

Explanation:

Hello,

In this case, the decomposition of hydrogen peroxide is given by:

[tex]2H_2O_2\rightarrow 2H_2O+O_2[/tex]

Which occurs in gaseous phase, therefore the enthalpy of reaction is:

[tex]\Delta _rH=2\Delta _fH_{H_2O}-2\Delta _fH_{H_2O_2}[/tex]

Oxygen is not included as it is a pure element. The enthalpies of formation for both hydrogen peroxide and water are -136.11 and -241.83 kJ/mol respectively, so we compute the enthalpy of reaction:

[tex]\Delta _rH=2(-241.83kJ/mol)-2(-136.11kJ/mol)=-211.44kJ/mol[/tex]

Then, the total heat that is released for 1.71 mol of hydrogen peroxide is:

[tex]Q=n*\Delta _rH=1.71mol*-211.44kJ/mol\\\\Q=-361.56kJ[/tex]

Whose sign means a released heat.

Regards.

find the given attachment

Answer:

We can produce 6.20 grams of CO2

Explanation:

Step 1: Data given

Mass of hexane = 4.3 grams

Molar mass of hexane = 86.18 g/mol

Mass of oxygen = 7.14 grams

Molar mass of oxygen = 32.0 g/mol

Step 2: The balanced equation

2C6H14 + 19O2 → 12CO2 + 14H2O

Step 3: Calculate moles

Moles = mass / molar mass

Moles hexane = 4.3 grams / 86.18 g/mol

Moles hexane = 0.0499 moles

Moles oxygen = 7.14 grams / 32.0 g/mol

Moles oxygen = 0.2231 moles

Step 4: Calculate the limiting reactant

For 2 moles hexane we need 19 moles O2 to produce 12 moles CO2 and 14 moles H2O

Oxygen is the limiting reactant. It will completely be consumed ( 0.2231 moles). Hexane is in excess. There will react 2/19 * 0.2231 = 0.02348 moles

There will be porduced 12/19 * 0.2231 = 0.1409 moles CO2

Step 5: Calculate mass CO2

Mass CO2 = moles CO2 * molar mass CO2

Mass CO2 = 0.1409 moles * 44.01 g/mol

Mass CO2 = 6.20 grams

We can produce 6.20 grams of CO2

Answer:

(a) [tex]m=2.69m[/tex]

(b) [tex]x_{LiBr}=0.099[/tex]

(c) [tex]\% LiBr=18.9\%[/tex]

Explanation:

Hello,

In this case, given the molality in mol/L, we can compute the required units of concentration assuming a 1-L solution of acetonitrile and lithium bromide that has 1.80 moles of lithium bromide:

(a) For the molality, we first compute the grams of lithium bromide in 1.80 moles by using its molar mass:

[tex]m_{LiBr}=1.80mol*\frac{86.845 g}{1mol}=156.32g[/tex]

Next, we compute the mass of the solution:

[tex]m_{solution}=1L*0.826\frac{g}{mL}*\frac{1000mL}{1L}=826g[/tex]

Then, the mass of the solvent (acetonitrile) in kg:

[tex]m_{solvent}=(826g-156.32g)*\frac{1kg}{1000g}=0.670kg[/tex]

Finally, the molality:

[tex]m=\frac{1.80mol}{0.670kg} \\\\m=2.69m[/tex]

(b) For the mole fraction, we first compute the moles of solvent (acetonitrile):

[tex]n_{solvent}=669.68g*\frac{1mol}{41.05 g} =16.31mol[/tex]

Then, the mole fraction of lithium bromide:

[tex]x_{LiBr}=\frac{1.80mol}{1.80mol+16.31mol}\\ \\x_{LiBr}=0.099[/tex]

(c) Finally, the mass percentage with the previously computed masses:

[tex]\% LiBr=\frac{156.32g}{826g}*100\%\\ \\\% LiBr=18.9\%[/tex]

Regards.

Answer:

Option D

Explanation:

A mechanical wave is a wave of energy that can travel long distances and could go through characteristics of matter such as solids, liquids, and gases. Mechanical waves can also travel through vacuums. A good example of a mechanical wave would be sound, sound is a wave spread through a object and can go through different types of matter. Which is why your answer is option D "sunshine." Light cannot go through a vacuum while sounds, and water can.

Hope this helps.

The mechanical wave example does not include the sunshine

It is the wave of energy that can travel long distances and considered the characteristics of matter like solids, liquids, and gases. It can also travel via vacuums. The Light cannot go via a vacuum while sounds, and water can go.

Learn more about sound here:https://brainly.com/question/16750970

Answer:

The excess reactant is N2H4 and the leftover mass is 10.17g.

Explanation:

Step 1:

The balanced equation for the reaction.

N2O4 + 2N2H4 —> 3N2 + 4H2O

Step 2

Determination of the masses of N2O4 and N2H4 that reacted from the balanced equation:

Molar mass of N2O4 = 92.02 g/mol

Mass of N2O4 from the balanced equation = 1 x 92.02 = 92.02g

Molar mass of N2H4 = 32.05 g/mol

Mass of N2H4 from the balanced equation = 2 x 32.05 = 64.1g

From the balanced equation above, 92.02g of N2O4 reacted with 64.1g of N2H4.

Step 3:

Determination of the excess reactant. This is illustrated below:

From the balanced equation above, 92.02g of N2O4 reacted with 64.1g of N2H4.

Therefore, 50g of N2O4 will react with = (50 x 64.1)/92.02 = 34.83g of N2H4.

From the calculations made above, we can see that only 34.83g of N2H4 reacted out of 45g that was given. Therefore, N2H4 is the excess reactant.

Step 4:

Determination of the mass of excess reactant that is leftover.

The excess reactant is N2H4 and the leftover mass can be obtained as follow:

Mass of N2H4 given = 45g

Mass of N2H4 that reacted = 34.83g

Leftover mass of N2H4 =..?

Leftover mass of N2H4 = (Mass of N2H4 given) – (Mass of N2H4 that reacted)

Leftover mass of N2H4 = 45 – 34.83

Leftover mass of N2H4 = = 10.17g.

Answer:

pH of the acid

Explanation:

Answer:

Explanation:

CHECK THE ATTACHMENT FOR THE COMPLETE QUESTION AND THE DETAILED EXPLANATION

NOTE:

Equatorial atoms are referred to atoms that are attached to carbons in the cyclohexane ring which is found at the equator of the ring.

Axial atoms are atoms that exist in a bond which is parallel to the axis of the ring in cyclohexane

Answer:I hope it will be beneficial for you

Force of attraction between the particles of solid is very strong the particles of solid are held together by strong inter molecular forces leading to the formation of a rigid structure

Force of attraction between the particles of the liquid is weak as compare to solids there particles are far away from each other and have the property to move easily.

Force of attraction between the particles of gases is very weak than the two states hence the particles of gases are highly compressible having week intermolecular interaction between them and have indefinite shape and volume

Answer:

Forces between particles in Liquids are closely packed  compared to other states of matter like the liquid and gaseous state of matter.

Explanation:

Answer:

[Cd²⁺] = 2.459x10⁻⁶M

Kf = 9.96x10⁶

Explanation:

Solubility of CdC₂O₄ is 6.1x10⁻³M and ksp is 1.5x10⁻⁸

The ksp of CdC₂O₄ is:

CdC₂O₄(s) ⇄ Cd²⁺(aq) + C₂O₄²⁻(aq)

ksp = [Cd²⁺] [C₂O₄²⁻] = 1.5x10⁻⁸

As solubility is 6.1x10⁻³M, concentration of C₂O₄²⁻ ions is 6.1x10⁻³M. Replacing:

[Cd²⁺] = 1.5x10⁻⁸ / [6.1x10⁻³M]

All Cd²⁺ in solution is 6.1x10⁻³M and exist as Cd²⁺ and as Cd(NH₃)₄²⁺. That means concentration of Cd(NH₃)₄²⁺ is:

[Cd(NH₃)₄²⁺] + [Cd²⁺] = 6.1x10⁻³M

[Cd(NH₃)₄²⁺] = 6.1x10⁻³M - 2.459x10⁻⁶M = 6.098x10⁻³M

In the same way, the whole concentration of NH₃ in solution is 0.150M, as you have 4ₓ6.098x10⁻³M = 0.024M of NH₃ producing the complex, the concentration of the free NH₃ is:

[0.150M] = [NH₃] + 0.024M

The equilibrium of the complex formation is:

Cd²⁺ + 4 NH₃ → Cd(NH₃)₄²⁺

The kf, formation constant, is defined as:

Kf = [Cd(NH₃)₄²⁺] / [Cd²⁺] [NH₃]⁴

Replacing:

Kf = [6.098x10⁻³M] / [2.459x10⁻⁶M] [0.1256M]⁴

Answer:

endothermic

Explanation:

Heat is added to make the process possible.

Answer:

572. 3 g of NH3

Explanation:

Equation of the reaction: 3H2 + N2 ----> 2NH3

From the equation of reaction, 3 moles of H2 reacts with 1 mole of N2 to produce 2 moles of NH3.

Since N2 is in excess in the given reaction, H2 is the limiting reactant.

Molar mass of H2 = 2 g/mol

Molar mass of NH3 = 17 g/mol

Therefore 3 * 2 g of H2 reacts to produce 2 * 17 g of NH3

6 g of H2 produces 34 g of NH3

101 g of H2 will produce (34 * 101)/6 g of NH3 = 572.3 g of NH3

Therefore, 572.3 g of NH3 are produced

Answer:

572.33g of NH3.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

N2 + 3H2 —> 2NH3

Next, we shall determine the mass of the H2 that reacted and the mass of NH3 produced from the balanced equation. This is illustrated below:

Molar Mass of H2 = 2x1 = 2g/mol

Mass of H2 from the balanced equation = 3 x 2 = 6g

Molar Mass of NH3 = 14 + (3x1) = 17g/mol

Mass of NH3 from the balanced equation = 2 x 17 = 34g.

From the balanced equation above,

6g of H2 reacted to produce 34g of NH3.

Finally, we can determine the mass of ammonia (NH3) produced by reacting 101g of H2 as follow:

From the balanced equation above,

6g of H2 reacted to produce 34g of NH3.

Therefore, 101g of H2 will react to produce = ( 101 x 34) / 6 = 572.33g of NH3.

Therefore, 572.33g of NH3 is produced from the reaction.

Answer:

a. TFinal = -6.57°C

b. Tfinal = 101.80°C

Explanation:

When a solute is added to a solvent producing an ideal solution, the freezing point of the solution decreases with regard to pure solvent. Also, boiling point increases with regard to pure solvent.

The formulas are:

Freezing point:

ΔT = Kf×m×i

Where Kf is freezeing point depression constant of water (1.86°C/m), m is molality of solution and i is van't Hoff factor (1 for ethylene glycol).

Boiling point:

ΔT = Kb×m×i

Where K is freezeing point depression constant of water (0.51°C/m), m is molality of solution and i is van't Hoff factor (1 for ethylene glycol).

Moles of 21.4g of ethylene glycol (Molar mass: 62.07g/mol) are:

21.4g C₂H₆O₂ ₓ (1mol / 62.07g) = 0.345 moles

And kg of 97.6mL of water = 97.6g are 0.0976kg. Molality of the solution is:

0.345mol / 0.0976kg = 3.5325m

Replacing in the formulas:

a. Freezing point:

ΔT = 1.86C/m×3.5325m×1

ΔT = 6.57°C

0°C - Tfinal = 6.57°C

b. Boiling point:

ΔT = 0.51°C/m×3.5325m×1

ΔT = 1.80°C

Tfinal - 100°C = 1.80°C

Answer:

C

Explanation:

This is the definition of an isomer.

Answer:

The correct answer is 5.447 × 10⁻⁵ vacancies per atom.

Explanation:

Based on the given question, the at 750 degree C the number of vacancies or Nv is 2.8 × 10²⁴ m⁻³. The density of the metal is 5.60 g/cm³ or 5.60 × 10⁶ g/m³. The atomic weight of the metal given is 65.6 gram per mole. In order to determine the fraction of vacancies, the formula to be used is,  

Fv = Nv/N------ (i)  

Here Nv is the number of vacancies and N is the number of atomic sites per unit volume. To find N, the formula to be used is,  

N = NA×P/A, here NA is the Avogadro's number, which is equivalent to 6.022 × 10²³ atoms per mol, P is the density and A is the atomic weight. Now putting the values we get,  

N = 6.022 × 10²³ atoms/mol × 5.60 × 10⁶ g/m³ / 65.6 g/mol

N = 5.14073 × 10²⁸ atoms/m³

Now putting the values of Nv and N in the equation (i) we get,  

Fv = 2.8 × 10²⁴ m⁻³ / 5.14073 × 10²⁸ atoms/m^3

Fv = 5.44669 × 10⁻⁵ vacancies per atom or 5.447 × 10⁻⁵ vacancies/atom.  

Answer:I suppose it is mercury...

Explanation:

I don't say u must have to mark my ans as brainliest but if it has really helped u plz don't forget to thnk me...

Answer:

Explanation:

The given chemical reaction is:

[tex]2H_2O_{(l)} \to^{I^-}} 2H_2O_{(l)}+O_2_{(g)}[/tex]

From above equation  [tex]I^-[/tex] serves as catalyst which is not consumed by the reaction and also it is completely recovered; as a result to that , the full volume of KI will definitely react with AgNO₃.

Given that :

the volume of potassium iodide [tex]V_{KI} = 15 \ ml[/tex]

the molarity of potassium [tex]M_{KI} = 0.1 \ M[/tex]

the volume of distilled water [tex]V_W = 15 \ mL[/tex]

The volume of 3% [tex]H_2O_2 \ \ V_{H_2O_2} = 5 \ mL[/tex]

Molarity of AgNO₃ [tex]M_{AgNO_3} = 0.1 \ M[/tex]

Let take an integral look with the reaction between KI and AgNO₃; we have

[tex]KI + AgNO_3 \to KNO_3 + AgI[/tex]

At the end point; the moles of KI will definitely be equal to the moles of AgNO₃

So;

[tex]M_{KI}V_{KI}= M_{AgNO_3}V_{AgNO_3} \\ \\ V_{AgNO_3} = \dfrac{M_{KI}V_{KI}}{M_{AgNO_3}} \\ \\ \\ V_{AgNO_3} = \dfrac{ 0.1*15}{0.1}[/tex]

[tex]V_{AgNO_3} = 15 \ ml[/tex]

Thus; the volume of 0.1 M AgNO₃  needed to reach the end point is 15 mL

Answer:

This isotope of fluorine has 9 protons, 9 electrons and 10 neutrons.

Explanation:

Answer:

ΔH°f C₂H₅O₂N(s)  = -537.2kJ

Explanation:

Based on the reaction:

4 C₂H₅O₂N(s) + 9O₂(g) → 8CO₂(g) + 10H₂O(l) + 2N₂(g)

ΔHrxn = ΔH°f products - ΔH°f reactants.

As:

ΔH°fO₂(g) = 0

ΔH°fCO₂(g) = -393.5kJ/mol

ΔH°fH₂O(l) = -285.8kJ/mol

ΔH°fN₂(g) = 0

The ΔHrxn is:

ΔHrxn = (8×-393.5kJ/mol + 10×-285.8kJ/mol) - (4×ΔH°fC₂H₅O₂N(s)) = -3857kJ/mol

-6006kJ/mol - (4×ΔH°fC₂H₅O₂N(s)) = -3857kJ/mol

-4×ΔH°fC₂H₅O₂N(s) = 2149kJ/mol

ΔH°fC₂H₅O₂N(s) = 2149kJ/mol / -4

Answer: (e) The pressure in the container increases but does not double.

Explanation:

To solve this, we need to first remember our gas law, Boyle's law states that the pressure and volume of a gas have an inverse relationship. That is, If volume increases, then pressure decreases and vice versa, when temperature is held constant. Therefore, increasing the volume in this case does not double the pressure owning to out gas law, but an increase in pressure would be noticed if temperature is constant

The pressure in the container increases but does not double.

At constant temperature and volume, the pressure of a given mass of gas is directly proportional to the number of moles of gas present.

Number of moles of He = 10 g/4 g/mol = 2.5 moles

Number of moles of Ne = 10 g/20 g/mol  = 0.5 moles

We can see that the number of moles only increases by 1/5 of its initial value therefore, the pressure in the container increases but does not double.

Learn more: https://brainly.com/question/8646601

Answer:

It's ferric oxide Fe2O3

Explanation:

I don't say u must have to mark my ans as brainliest but if it has really helped u plz don't forget to thank me plz...

Answer:

3–bromo–5–chloro–4–methylhexane.

Explanation:

To name the compound given in the question, the following must be observed:

1. Locate the longest continuous carbon chain. This gives the parent name of the compound. In this case, the longest chain is carbon 6 i.e Hexane.

2. Identify the substituents attached. In this case the substituents attached are:

a. Chloro i.e Cl.

b. Bromo ie Br.

c. Methyl i.e CH3.

3. Give the substituents the lowest possible count alphabetically. Bromo comes before Chloro alphabetically, so we shall consider bromo first. Their positions are given below:

Bromo i.e Br at carbon 3

Chloro i.e Cl is at carbon 5

Methyl i.e CH3 is at carbon 4

4. Combine the above to get the name of the compound.

Therefore, the name of the compound is:

3–bromo–5–chloro–4–methylhexane.

Answer:

Q = 12.38

Explanation:

The Nernst equation is given as; Ecell = E°cell - (2.303RT/nF) log Q  ;where Q is the reaction quotient.

The reaction quotient, Q  in a reaction, is the product of the concentrations of the products divided by the product of the concentrations of the reactants.

In an electrochemical cell, Q is the ratio of the concentration of the electrolyte at the anode to that of the electrolyte at the cathode.

Q = [anode]/[cathode]

therefore , Q = 0.052/0.0042 = 12.38

Answer:

16.0473 g/L

Explanation:

0.300 M=

0.300 mol/L x 53.491 grams/mol = 16.0473 grams/L

The concentration of the 0.300M NH₄Cl solution in g/L will be equal to 16.04 g/L.

The concentration of the solution can be determined if we have the molecular formula of the compound and its molecular weight. We can easily determine the majority of a solution from the moles of solute and the volume of the solution.

The molarity of a solution can be evaluated from the number of moles of a solute per liter of a solution.

The Molarity can be determined from the formula mentioned below:

Molarity (M) = Moles of solute (n)/Solution's volume ( in L)

Given, the molarity of NH₄Cl solution = 0.300 M

We can also write it as 0.300 mol/L

It means 0.300 moles in one liter.

The molar mass of NH₄Cl  = 53.5 g/mol

Then the mass of 0.300 mol of NH₄Cl  = 0.300 ×53.5 = 16.04 g

Therefore, the concentration of NH₄Cl solution is 16.04g/L is equivalent to 0.300 M.

Learn more about molarity, here:

brainly.com/question/8732513

#SPJ5

Answer:

When hypercapnia processes occur, where the concentration of carbon dioxide gas increases in the blood, the protonization of the blood increases, this means that the H + ions increase in concentration, thus generating metabolic acidosis.

This metabolic acidosis is regulated by various systems, but the respiratory system collaborates by generating hyperventilation, to increase blood oxygen pressures, decrease CO2 emissions, and indirectly decrease acidity.

Explanation:

This method of regulating the body is crucial, since the proteins in our body will not be altered if they do not happen.

The enzymes, the red globules, and many more fundamental things for life ARE PROTEINS, that in front of acidic media these modify their structure by denaturing themselves and ceasing to fulfill their functions. This is the reason why it seeks to neutralize the blood pH when it comes to an increase in CO2.