What is the medium of the wave shown in the photograph?
A. The water
B. Kinetic energy
C. The duck
D. Gravity

Answer:

25N/s or 25kg*m/s^2

Explanation:

It is written wrong because the unit of momentum is kgm/s^2 or N/s

Answer:

245 divided by 5.14=47.6653696 or 47.66

Explanation:

Answer: This is not easy lol

Explanation:

Answer:

8 kV

Explanation:

Here is the complete question

Assume a device is designed to obtain a large potential difference by first charging a bank of capacitors connected in parallel and then activating a switch arrangement that in effect disconnects the capacitors from the charging source and from each other and reconnects them all in a series arrangement. The group of charged capacitors is then discharged in series. What is the maximum potential difference that can be obtained in this manner by using ten 500 μF capacitors and an 800−V charging source?

Solution

Since the capacitors are initially connected in parallel, the same voltage of 800 V is applied to each capacitor. The charge on each capacitor Q = CV where C = capacitance = 500 μF and V = voltage = 800 V

So, Q = CV

= 500 × 10⁻⁶ F × 800 V

= 400000 × 10⁻⁶ C

= 0.4 C

Now, when the capacitors are connected in series and the voltage disconnected, the voltage across is capacitor is gotten from Q = CV

V = Q/C

= 0.4 C/500 × 10⁻⁶ F

= 0.0008 × 10⁶ V

= 800 V

The total voltage obtained across the ten capacitors is thus V' = 10V (the voltages are summed up since the capacitors are in series)

= 10 × 800 V

= 8000 V

= 8 kV

Answer:

into the page

Explanation:

Since the uniform electric field is in the negative y direction so its is -E and the electron is travelling in the positive x direction, it experiences an electric force F = -e × -E = + eE, so the electric force is in the positive y direction. Now since the net force on the electron is zero in the region of the magnetic field, it follows that the direction of the magnetic force is opposite to that of the electric force. Since the electric force is in the positive y direction, the magnetic force is in the negative y direction.

By the right hand rule, since the magnetic force is in the negative y direction and the electron moves in the positive x direction, it follows that the magnetic field is in the positive z direction, into the page.

Answer:

Initial velocity u = 60 ft/s

Explanation:

Given:

Deceleration a = -36 ft/s²

Distance covered s =50ft

Final  velocity v = 0 ft/s

Find:

Initial velocity u

Computation:

Using third equation of motion;

v² = u² + 2as

0² = u² + 2(-36)(50)

0 = u² - 3600

u² = 3600

u = 60 ft/s

Initial velocity u = 60 ft/s

Answer:

3. (a) - is the answer most likely

4: (a)

5 (d or c)

6 (b)

Answer:

you can write some points its an explanation

and similarities. or common

Explanation:

Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy. A whole branch of physics, thermodynamics, deals with how heat is transferred between different systems and how work is done in the process (see the 1ˢᵗ law of thermodynamics).

The faster the atoms or molecules move, the more heat or thermal energy they have. ... A hair straightener turns the electrical energy from a wall outlet into heat (thermal energy). 4. As electricity runs through the filaments in a space heater, the electrical energy is converted into heat (thermal energy).

Answer:

28.7%

Explanation:

efficiency = work output /work input × 100

Answer:

C because that requires lots of energy

Answer:

Some plains form as ice and water erodes, or wears away, the dirt and rock on higher land. Water and ice carry the bits of dirt, rock, and other material, called sediment, down hillsides to be deposited elsewhere. As layer upon layer of this sediment is laid down, plains form. Volcanic activity can also form plains.

The force acting on the object is constant, so the acceleration of the object is also constant. By definition of average acceleration, this acceleration was

a = ∆v / ∆t = (6 m/s - 0) / (1.7 s) ≈ 3.52941 m/s²

By Newton's second law, the magnitude of the force F is proportional to the acceleration a according to

F = m a

where m is the object's mass. Solving for m gives

m = F / a = (10 N) / (3.52941 m/s²) ≈ 2.8 kg

Answer:

[tex]1.62\times 10^{-8}\ \text{s}[/tex]

Explanation:

[tex]\epsilon_0[/tex] = Vacuum permittivity = [tex]8.854\times 10^{-12}\ \text{F/m}[/tex]

[tex]A[/tex] = Area = [tex]10\times 2\times 10^{-4}\ \text{m}^2[/tex]

[tex]d[/tex] = Distance between plates = 1 mm

[tex]V_c[/tex] = Changed voltage = 60 V

[tex]V[/tex] = Initial voltage = 100 V

[tex]R[/tex] = Resistance = [tex]1000\ \Omega[/tex]

Capacitance is given by

[tex]C=\dfrac{\epsilon_0A}{d}\\\Rightarrow C=\dfrac{8.854\times 10^{-12}\times 10\times 2\times 10^{-4}}{1\times 10^{-3}}\\\Rightarrow C=1.7708\times 10^{-11}\ \text{F}[/tex]

We have the relation

[tex]V_c=V(1-e^{-\dfrac{t}{CR}})\\\Rightarrow e^{-\dfrac{t}{CR}}=1-\dfrac{V_c}{V}\\\Rightarrow -\dfrac{t}{CR}=\ln (1-\dfrac{V_c}{V})\\\Rightarrow t=-CR\ln (1-\dfrac{V_c}{V})\\\Rightarrow t=-1.7708\times 10^{-11}\times 1000\ln(1-\dfrac{60}{100})\\\Rightarrow t=1.62\times 10^{-8}\ \text{s}[/tex]

The time taken for the potential difference to reach the required level is [tex]1.62\times 10^{-8}\ \text{s}[/tex].

Answer:

D:#2 African Plate

Explanation:

The African Plate is flanked by the Red sea rift and the minor African plate.

The Red sea rift is a small part of a greater line of rifts known as the Great African Rift Valley. The rift valley is making several small lakes all through Africa and it will eventually split up the African continent.

The Red sea lift is the divergent boundary between the African plate and the Arabian plate. It means that the two plates are moving apart or spreading apart.

Answer:

just search it up you'll get ur answer

Answer:

the number of turns in the primary coil is 13000

Explanation:

Given the data in the question;

V₁ = 13000 V

V₂ = 120 V

N₁ = ?

N₂ = 120 turns

the relation between the voltages and the number of turns in the primary and secondary coils can be expressed as;

V₁/V₂ = N₁/N₂

V₁N₂ = V₂N₁

N₁ = V₁N₂ / V₂

so we substitute

N₁ = (13000 V × 120 turns) / 120 V

N₁ = 1560000 V-turns / 120 V

N₁ = 13000 turns

Therefore, the number of turns in the primary coil is 13000

Answer:

temperature

Explanation:

if you look at a hertzsprung-russel diagram. you can understand how I got that answer

Answer:

1.78×10×10^10 electron

Explanation:

Electric field outside the sphere can be calculated using below expression

E= kq/ r^2..........eqn(1)

Where k= 9 × 10^9 NM^2/C^2

q= charge

E= 1440 N/C

Diameter= 30.0 cm= 0.3 m

r= radius= 0.3/2= 0.15m

If we make q subject of formula from eqn(1) we have

q= Er^2/k............eqn(2)

q= 1440 × (0.15)^2 /(9 × 10^9 )

= 2.85×10^-9C

Total charge is an integer of electron charge , then we can calculate the number of the electron using the expression below

q= Ne

Where

N = number of electron

Making N subject of the formula we have

N= q/e

Where e= electron value= 1.6× 10^-19

N=2.85×10^-9 /1.6× 10^-19

= 1.78×10×10^10 electron

Answer:

B. 3.1 × 10^5 V

Explanation:

Answer:

B

Explanation:

e2021

Answer:

[tex]\lambda_s =6.43*10^-4m[/tex]

Explanation:

From the question we are told that:

Diffraction grating [tex]N=1250slits/cm[/tex]

Distance b/w Screen and grating length [tex]d_{sg}=17.5 cm[/tex]

Distance b/w neighboring maxima and Screen [tex]d_{ms}=8.44[/tex]

Generally the equation for grating space is mathematically given by

[tex]d(g)=\frac{1}{N}[/tex]

[tex]d(g)=\frac{100}{1250}[/tex]

[tex]d(g)=0.08[/tex]

Generally the equation for small angle approximation is mathematically given by

[tex]\triangle y=\frac{\lambda d}{L}[/tex]

Therefore for longest wavelength

[tex]\lambda _l=\frac{8.44*10^{-3}*(0.08)}{0.175m}[/tex]

[tex]\lambda _l=3.858*10^{-3}[/tex]

Therefore the third order maximum equation for the shorter wavelength as

[tex]\lambda_s =\frac{1}{6} \lambda_l[/tex]

[tex]\lambda_s =\frac{1}{6} (3.858*10^-^3)[/tex]

[tex]\lambda_s =6.43*10^-4m[/tex]

The wavelengths in the light is given as

[tex]\lambda_s =6.43*10^-4m[/tex]

Answer:

3.54

Explanation:

some nerd thing I found it on Yahoo answers

Answer:

3.54º

Explanation:

Find the blue θ first

sin⁻¹(540x10⁻⁹/2.88x10⁻⁶)=8.99°

Then find the orange θ

sin⁻¹(625x10⁻⁹/2.88x10⁻⁶)=12.53°

Take the differences and subtract

12.53°－8.99°=3.54°

Answer:

-589.05 J

Explanation:

Using work-kinetic energy theorem, the work done by friction = kinetic energy change of the base runner

So, W = ΔK

W = 1/2m(v₁² - v₀²) where m = mass of base runner = 72.9 kg, v₀ = initial speed of base runner = 4.02 m/s and v₁ = final speed of base runner = 0 m/s(since he stops as he reaches home base)

So, substituting the values of the variables into the equation, we have

W = 1/2m(v₁² - v₀²)

W = 1/2 × 72.9 kg((0 m/s)² - (4.02 m/s)²)

W = 1/2 × 72.9 kg(0 m²/s² - 16.1604 m²/s²)

W = 1/2 × 72.9 kg(-16.1604 m²/s²)

W = 1/2 × (-1178.09316 kgm²/s²)

W = -589.04658 kgm²/s²

W = -589.047 J

W ≅ -589.05 J

Answer:

the answer is false

Explanation:

plastic doesnt conduct anything

Answer:

all of the above.

Explanation:

all of these qualities are crucial in order to have a successful business.

Answer:

5.48 m/s.

Explanation:

Use the formula a=v^2/r.

Answer: E= 20 N/C

Explanation: Charge q = 2.5 C , force F = 50 N. F = qE and

E= F/q= 50N / 2.5 C = 20 N/C

Answer:

Speesd

Explanation:

Answer:

 x = 25 / μ     [ ft]

Explanation:

To solve this exercise we can use Newton's second law.

Let's set a reference system where the x axis is parallel to the road

Y axis  

       N_B + N_A - W_van - W_load = 0

       N_B + N_A = W_van + W_load

X axis

     fr = ma

     a = fr / m

the total mass is

        m = (W_van + W_load) / g

the friction force has the expression

      fr = μ N_{total}

      fr = μy (W_van + W_load)

we substitute

      a = μ (W_van + W_load)    [tex]\frac{g}{W_van + W_load}[/tex]

      a = μ g

taking the acceleration let's use the kinematic relations where the final velocity is zero

       v² = v₀² - 2 a x

       0 = v₀² -2a x

        x = [tex]\frac{v_o^2}{2a}[/tex]

        x = [tex]\frac{v_o^2}{2 \mu g}[/tex]

        x = [tex]\frac{40^2}{2 \ 32 \ \mu}[/tex]

        x = 25 / μ     [ ft]

Answer:

1) It seems that he would need the central gravitational force

   (the sun)

2) Also the planets would need to be included (orbits around the sun)

    Mercury, Venus, Earth, Mars, Jupiter, Saturn, etc.

3. Then, many of the planets have significant objects (moons) rotating about them.

Those would seem to be objects to be included in a model of the solar system.

1) He would need the central gravitational force (the sun)

2) The planets would need to be included: Mercury, Venus, Earth, Mars, Jupiter, Saturn, etc.

3) Many of the planets have specific moons rotating about them.

Larry should put the Earth between the planets Venus, and Mars.