Answer:
Central and South American forests.
Explanation: https://brainly.in/question/7540305
What causes the sun's core and the earth's core to have extremely high temperatures?
Select one:
a. The sun undergoes fusion and the earth undergoes fission. b. Both have nuclear fusion occurring in their cores.
c. Both have nuclear fission occurring in their cores.
d. The sun undergoes fission and the earth undergoes fusion.
PLEASE HELP WILL GIVE 100 points
Record the data from each trial in the data chart below. Be sure to fill in the chart completely.
Test One
Parent 1: FF
Parent 2: FF
Phenotype ratio:
short fur: long fur
Test Two
Parent 1: Ff
Parent 2: FF
Phenotype ratio:
short fur: long fur
Test Three
Parent l: ff
Parent 2: ff
Phenotype ratio:
short fur: long fur
Answer: Test One
Parent 1: FF
Parent 2: FF
Phenotype ratio:
short fur: long fur
Test Two
Parent 1: Ff
Parent 2: FF
Phenotype ratio:
short fur: long fur
Test Three
Parent l: ff
Parent 2: ff
Phenotype ratio:
short fur: long fur
Explanation:
Heptane, pentane and octane are accidentally mixed. They all have different boiling points. Pentane boils at 360 ° C, hexane boils at 690 ° C and octane boils at 12 ° C. What method would you use to separate these liquids? Explain how the method works.
Answer:
Fractional distillation
Explanation:
Heat the mixture upto 700°C
The compuond with low boiling point will evaporate first and the compound with higher boiling point will evaporate last.
The volume of a gas is 450 mL when its pressure is 1.00 atm. If the temperature of the gas does not change, what is the
pressure when its volume is changed to 2.00 L?
Use PV = P2V2.
0.225 atm
O 0.444 atm
O 2.25 atm
O 4.44 atm
Answer: 0.225 atm
Explanation:
For this problem, we have to use Boyle's Law.
Boyle's Law: P₁V₁=P₂V₂
Since we are asked to find P₂, let's manipulate the equation.
P₂=(P₁V₁)/V₂
[tex]P_{2} =\frac{(1.00atm)(0.45L)}{2.00L}[/tex]
With this equation, the liters cancel out and we will be left with atm.
P₂=0.225 atm
10.Conduction is the method of heat transfer in solids but not liquids and gases. Why?
(1 Point)
Finiter your
Answer:
Conduction only happens when the object is a solid, because conduction happens in objects that are closely, with molecules that are closely packed together, and have a definite shape. Since, in liquids and gases, the shape is not definite nor do they have closely packed molecules., conduction does not take place in them
An experimental procedure says to accurately weigh approximately 1 g of
substance on analytical balance. Which of the following measurements are
consistent with these instructions? Select all that apply.
1.0456 g
1.0 g
0.9811g
1 g
1.01g
O 0.99
Answer:
1.0456 g and 0.9811g
Explanation:
The measurements that are consistent with the approximate 1 g instruction would be 1.0456 g and 0.9811g.
Analytical balance generally weighs to an accuracy of 4 decimal places. Hence, every other option that is short of being in 4 decimal places is incorrect.
Also, 1.0456 g and 0.9811g when approximated to the nearest whole number give 1 g.
What might happen to global atmospheric carbon levels if the polar ice caps were to melt?
If the polar ice caps were to melt then it could lift the lid of a new carbon sink capable of soaking up carbon dioxide.
What happens if the polar ice caps melt?
If all the ice protecting Antarctica, Greenland, and mountain glaciers around the sector were to melt, sea degrees might upward push about 70 meters (230 ft). the sea might cowl all of the coastal towns. And the land place would decrease considerably. but many cities, inclusive of Denver, might live to tell the tale.
How do melting ice caps affect the ecosystem?
Melting ice reasons more warming.
because they are darker in the shade, the ocean and land take in more incoming solar radiation and then launch the warmth to the environment. This reasons more global warming. in this way, melting ice causes more warming and so extra ice melts.
Learn more about Global Warming at https://brainly.com/question/3553382
#SPJ2
What one advantage of owning a solar car ?
Answer:
You have no fuel cost and has low cost Maintenance
Explanation:
Which is one way that a short-term environmental change will most likely affect organisms within an ecosystem?
O It will lead to larger populations.
O It will lead to speciation.
O It will lead to adaptation.
O It will lead to forced migration.
Answer:
It will lead to forced migration.
Explanation:
Changes in ecosystems affect living organisms. An ecosystem is a self supporting unit in which there is an exchange of materials and energy between the living and non living parts. The living part of an ecosystem is called its biotic component. This includes the organisms that live within the ecosystem. The nonliving parts of the ecosystem such as topography, rainfall etc are called abiotic components of the ecosystem.
A short-term environmental change usually forces organism to leave an ecosystem in their quest for survival. For instance, when short term environmental changes such as a sudden drop in rainfall causes drought, organisms migrate in order to obtain food and water. This is a forced migration.
Answer:
It will lead to forced migration.
Explanation:
áksjfponidosjdoiwpsoidjfps
kkcd
zjdfxhfdshf
shf
shd
d
dsd
sdf
Crude oil is a miscible mixture of liquids that has many uses . During the refining process it is separes and used to produce aviation fuel diesel fuel and gasoline how should scientists separate crude oil based on its physical properties
Answer:
3 rd point will be the ans
What is the chemical formula for the molecule modeled?
There are several ways to model a compound. One type
of model is shown.
A)СНО
B)C4H1102
C)C6H12O2
D)C6H90
Answer:
Tue answer is B - C4H1102
The chemical formula for the molecule modeled is C₆H₁₂O₂. Therefore, option C is correct.
What is a chemical formula ?The term chemical formula is defined as the elements that form the compound and the numbers of atoms of each element in the smallest unit of that compound. Water is consist of hydrogen and oxygen in a 2:1 ratio. The chemical formula for water is H₂O.
There are 3 main types of chemical formulas that are empirical formula, molecular formula and structural formula.
Empirical formulas represent the simplest whole-number ratio of atoms in a compound, molecular formulas represent the number of each type of atom in a molecule, and structural formulas represent how the atoms in a molecule are bonded to each other.
In a given molecule modeled C₆H₁₂O₂ we see that, there are six atoms of carbon, 12 atoms of hydrogen and 2 atoms of oxygen.
Thus, option C is correct.
To learn more about the chemical formula, follow the link;
https://brainly.com/question/11995171
#SPJ2
what is characteristics of the 6kingdoms
Answer:
Archaea, Bacteria, Protista, Fungi, Plantae, and Animalia
What is characteristics of the 6 kingdoms.
6 kingdoms of what? Are you talking about biology?
If yes I assume you're talking about the defitions for the animal kingdom made by Woese and his colleagues in 1977.
Eubacteria: Single-celled bacterial organisms.
Archaebacteria: Single celled bacterial organisms that live in extreme enviroments
Protista : Single-celled organisms more complex than bacteria
Plantae: Multi-celled, complex organisms that produce their own food
Fungi: Multi-celled organisms that don't produce their own food
Animalia: Complex, multi-celled, organisms that consume other organisms for food.
Horned animals have different sizes of horns. The size of their horns can affect their ability to
compete for a mate or provide protection from predators,
What is this an example of?
overproduction
O variation
survival of fit individuals
Answer:
survival of fit individuals
Explanation:
I believe its survival of fit individuals because the animals with different horns are going to be able to find a mate or provide better depending on their horn and its kind of like natural selection in the sense those who have genetically better (??) horns are more likely to survive. Hope it helps but it might be a little bit of a confusing explanation.
Answer:
variation
Explanation:
survival of the fittest, is more like, "out of 3 people only 1 makes it"
^ so the other guy is wrong.
Atoms with a high electronegativity, like oxygen have a strong attractive force
for electrons because
A. they have only a few valence electrons and need a total of eight to
fulfill the octet rule
O B. they're trying to share electrons with other elements of high
electronegativity
O C. opposites attract
O D. they re close to filling their outer shell, fuffilling the octet rule
Answer:
D. they're close to filling their outer shell, fulfilling the octet rule
Explanation:
:)
Unscramble the following words to form a complete sentence about the cycles of nature:
limited is through environment Matter recycled the on Earth is and
Answer: idk I have that question too , sorry to get ur hopes up high thinking this was an answer. PERIOTTTT
Explanation:
What volume of hydrogen will be produced at STP by the reaction of 67.3 g of tin with excess water according to the following reaction?
Answer:
Sn + 2H2O ==> Sn(OH)2 + 2H2
67.3 g Sn x 1 mol/119 g x 2 mol H2/mol Sn x 22.4 L/mole = answer in liters
Explanation:
Sn + 2H2O ==> Sn(OH)2 + 2H2
67.3 g Sn x 1 mol/119 g x 2 mol H2/mol Sn x 22.4 L/mole = answer in liters
The volume of hydrogen that will be produced from the reaction of 67.3 g of tin with excess water is 12.68 L
How to determine the mole of tin Mass of Sn = 67.3 gMolar mass of Sn = 119 g/mol Mole of Sn =?Mole = mass / molar mass
Mole of Sn = 67.3 / 119
Mole of Sn = 0.566 mole
How to determine the volume of H₂ producedSn + 2H₂O —> Sn(OH)₂ + H₂
From the balanced equation above,
1 mole of Sn reacted to produce 1 mole of H₂.
Therefore,
0.566 mole of Sn will also react to produce 0.566 mole of H₂
Recall
1 mole of H₂ = 22.4 L at STP
Therefore,
0.566 mole of H₂ = 0.566 × 22.4
0.566 mole of H₂ = 12.68 L
Thus, 12.68 L of H₂ were obtained from the reaction.
Learn more about stoichiometry:
https://brainly.com/question/14735801
#SPJ2
What is the best example of electromagnetic energy in everyday life
Answer:best
Explanation:
Best
Which of the following is NOT an
example of matter?
a. clouds
b. gasoline
С. ice
d. light
Answer:
Which of the following are not examples of matter, well clouds are matter, gasoline is matter, ice is matter, so it would be light.
What are the following equations for each:
1. Ratio of product concentrations reactant concentrations at equilibrium.
2. Ratio of partial pressures of products to partial pressures of reactants (for gas phase reactions only) at equilibrium
3. Ratio of products reactants for the reaction of a weak base with water at equilibrium.
4. The thermodynamic equilibrium constant, calculated from thermodynamic data, not concentrations.
5. The autoionization constant for water (= 1.0 x 10-14).
6. Ratio of products reactants for the reaction of a weak acid with water at equilibrium
Answer: thats alot of reading
Explanation:
Latent heat of vaporization is used to (1 Point) (a) overcome the forces of attraction between molecules in solid-state. (b) increase the kinetic energy of molecules in a liquid state. (c) overcome the forces of attraction between molecules in a liquid state. (d) increase the kinetic energy of molecules in the vapour state.
Answer:
Not sure what the answer is
Explanation:
I did this a while ago and dont remember sorry
Compounds formed when non-metals react with metals consist of particles called ionic compound
What are the 3 critical components of an electromagnet and what purpose do they each serve?
Answer:
A source of electricity, a wire coil, and an iron core
Explanation:
An electromagnet has three critical components:
1. A source of electricity
This is often a battery.
It generates the electric current that produces the magnetic field.
2. A wire coil
The wire carries the electric current.
Stacking the wire into loops makes a stronger magnetic field.
The more loops in the coil, the stronger the field.
3. An iron core
An iron core greatly increases the strength of the magnetic field within it and at its ends.
hi:) how to do 2(bi)?
Answer:
4 protons, 5 neutrons, 2 electrons
Explanation:
If you look at the numbers beside Be²⁺, the number 9 is the relative atomic mass and the number 4 is the proton (atomic) number. The relative atomic mass is the sum of the number of protons and the number of neutrons.
Number of protons= proton number.
Hence, number of protons= 4
Number of protons + neutrons= 9
4 + number of neutrons= 9
number of neutrons
= 9 -4
= 5
In an atom, the number of protons and electrons are the same since atoms are electrically neutral. But in an ion, the number of electrons is not equal to the number of protons since the atom gains/ loses electrons to form an ion. A positive sign means that electrons are given away.
Thus, Be gives away 2 electrons to form Be²⁺.
Original number of electrons= 4
Number of electrons in Be²⁺
= 4 -2
= 2
In summary, the number of protons and neutrons in an ion is the same as that of the atom. However, the number of electrons is not the same.
Answer:
Answer:
4 protons, 5 neutrons, 2 electrons
Explanation:
If you look at the numbers beside Be²⁺, the number 9 is the relative atomic mass and the number 4 is the proton (atomic) number. The relative atomic mass is the sum of the number of protons and the number of neutrons.
Number of protons= proton number.
Hence, number of protons= 4
Number of protons + neutrons= 9
4 + number of neutrons= 9
number of neutrons
= 9 -4
= 5
In an atom, the number of protons and electrons are the same since atoms are electrically neutral. But in an ion, the number of electrons is not equal to the number of protons since the atom gains/ loses electrons to form an ion. A positive sign means that electrons are given away.
Thus, Be gives away 2 electrons to form Be²⁺.
Original number of electrons= 4
Number of electrons in Be²⁺
= 4 -2
= 2
In summary, the number of protons and neutrons in an ion is the same as that of the atom. However, the number of electrons is not the same.
& BTW WOW U HAVE WHITENER TAPE !
In the reaction Fe2O3 + 3CO a 2Fe + 3CO2, 10 moles of solid iron and 15 moles of carbon dioxide are produced from 5 moles of iron (|||) oxide and 15 moles of carbon monoxide (CO). What is the ratio of carbon monoxide to solid iron
Answer:
Ratio is 3:2
3CO = 2Fe or 1.5 CO = 1 Fe
Explanation:
Fe2O3 + 3CO = 2Fe + 3CO2
Fe2O3 = Iron (|||) oxide
CO = Carbon monoxide
Fe = Solid Iron
CO2 = Carbon dioxide
Excellent is already balanced.
10 Moles Fe and 15 Moles of CO2
5 Moles Fe2O3 + 15 Moles 3CO = 10 Moles Fe + 15 Moles 3CO2
What is the ratio of carbon monoxide to solid iron
Ratio is 3:2 or 1.5 CO = 1 Fe
Can some one please help?
Neutralization Reactions
PREDICT THE PRODUCTS OF THE FOLLOWING REACTIONS
HNO3+ Ba(OH)2
+
+
H3PO4 + Ca(OH)2
HCI + FelOH)3 –
Answer:
2HNO3 + Ba(OH)2 = Ba(NO3)2 + 2H2O
H3PO4 + Ca(OH)2 = Ca3(PO4)2 + 6H2O
3HCl + Fe(OH)3) = FeCl3 + 3H2O
Explanation:
H+
N3-
O2-
Ba2+
OH-
P 5+, 3+, 3-
Ca2+
Cl-
Fe 2+, 3+
2HNO3 + Ba(OH)2 = Ba(NO3)2 + 2H2O
H3PO4 + Ca(OH)2 = Ca3(PO4)2 + 6H2O
3HCl + Fe(OH)3) = FeCl3 + 3H2O
What does Avogadro's law say about a gas atSTP? A; 1 L of any gas contains 22.4 moles at STP B; 1 L of any gas has a pressure of 22.4 atm at STP C; All gases are at 22.4 atm at STP D; 1 mole of any gas has a volume of 22.4 L at STP
Answer: 1 mole of any gas has a volume of 22.4 L at STP
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
According to ideal gas equation:
[tex]PV=nRT[/tex]
P = pressure of gas = 1 atm (at STP)
V = Volume of gas = ?
n = number of moles = 1
R = gas constant =[tex]0.0821Latm/Kmol[/tex]
T =temperature =[tex]273K[/tex] (at STP)
[tex]V=\frac{nRT}{P}[/tex]
[tex]V=\frac{1mol\times 0.0820 L atm/K mol\times 273K}{1atm}=22.4L[/tex]
Thus 1 mole of every gas occupies 22.4 L at STP
Answer:
1 mole of any gas has a volume of 22.4 L at STP
Explanation:
ap3xx
What is the charge on an electron?
O-1
O 0
O +1
O +2
Answer:
-1
Explanation:
Because it is the smallest sub-atomic particle
3. Hydrochloric acid is used to clean metals.
The acid reacts with the oxide layer on the surface of the metal, forming a salt and water.
Which word describes the metal oxide?
A alloy
B base
C element
D indicator
Answer:
Base
Explanation:
Acid + Base ⇒ Salt + Water (Neutralization Reaction)
So the substances forming salt and water must be acid and base.
Since HCl is acid so the Metal Oxide would be the base.
One million argon atoms is how many mol of argon atoms? (2 significant figures)
Answer:
1.66 * 10^-18 mol of Argon
Explanation:
Avogadro says 1 mol of anything has 6.022* 10^23 atoms/particles. Thus using this principle, 1 million argon atoms will have
[tex]1,000,000 atoms Argon * \frac{1mol Argon}{6.022*10^{23} atoms }[/tex]
[tex]1.66*10^{-18} mol \\\\ of Argon[/tex]
One million argon atoms is equivalent to 1.7 × 10⁻¹⁸ moles of argon atoms.
To convert one million (10⁶) argon atoms to moles of argon atoms, we will use Avogadro's number: there are 6.02 × 10²³ argon atoms in 1 mole of argon atoms.
[tex]10^{6} atom \times \frac{1 mol}{6.02 \times 10^{23}atom } = 1.7 \times 10^{-18} mol[/tex]
One million argon atoms is equivalent to 1.7 × 10⁻¹⁸ moles of argon atoms.
You can learn more about Avogadro's number here: https://brainly.com/question/13302703
What is the primary difference between a hypothesis and a theory?
Answer: A hypothesis is an explanation for observations. A theory is an explanation for what has been shown many times.
Explanation: