Answer:
The table that illustrates this equation is table A:
1 -6 0 up (0,0)
Step-by-step explanation:
The values of the parameters a, b, and c have to agree with the values for the general quadratic equation in standard form:
[tex]y = a\,x^2+b\,x+c[/tex]
compared to:
[tex]y=x^2-6\,x[/tex]
So the coefficient "a" of the quadratic term in our case is: "1"
the coefficient "b" of the linear term is : "-6"
the coefficient "c" for the constant term s : "0" (zero)
since the coefficient "a" is a positive number, we know that the parabola's branches must be opening "UP".
The y intercept can be found by evaluating the expression for x = 0:
[tex]y=x^2-6x\\y=(0)^2-6\,(0)\\y=0[/tex]
Therefore the y-intercept is at (0, 0)
These results agree with those of Table "A"
Answer:
Table A.)
Step-by-step explanation:
a 1, b -6, c 0, up, (0, 0), Table A.
Need answers to 32 and 33
Mo has some red and green sweets He eats 1/3 of the sweets ¾ of the sweets left over are green Mo buys himself 30 more green sweets. There are now 162 green sweets. How many sweets did Mo start with?
Answer:
176 sweets
Step-by-step explanation:
162 - 30 = 132 this finds the 3/4 before he purchased more sweets.
132 divided by 3 = 44 This finds how many thirds their are. (We do 3 not 4 because 1/4 is already gone and there are only 3rds lefts.)
44 x 4 = 176 This finds the total before he purchased more.
Hope this helps!
An employee wants to invest $50,000 in a pension plan. One investment offers 6% compounded quarterly. Another offers 5.75% compounded continuously.
(a) Which investment will ear more interest in 5 yr?
(b) How much more will the better plan earn?
Answer:
a. 6% one is better
b. $12,285.95
Step-by-step explanation:
a. For determining which investment earn more first we have to calculate both the investment which are as follows
a. Based on compound quarterly, the amount is find out by using the following formula
[tex]Amount = {Present\ value\times (1 + interest\ rate)} ^{number\ of\ years}[/tex]
where,
Present value is $50,000
Interest rate is = [tex]\frac{0.06}{4}[/tex] = 0.015
And, the number of years is
= [tex]4\times4[/tex]
= 16
So, the amount is
[tex]= \$50,000 \times (1 + 0.015)^{16}[/tex]
= $63,449.28
And, based on compounded continuously, the amount is determined by using the following formula
[tex]Amount = Present\ value\times e^{rt}[/tex]
[tex]= \$50,000 \times e.^{0575(4)}[/tex]
= $51,163.33
Therefore, The the investment at 6% is better
b. Now the difference in earning is
= $63,449.28 - $51,163.33
= $12,285.95
What is the square root of 100?
Answer:
10
Step-by-step explanation:
Answer:
10
Step-by-step explanation:
Square root is finding what number times what gets your goal.
10 x 10 = 100 so 100 squared is 10.
5 x 5 = 25 so 25 squared is 5.
4 x 4 = 16 so 15 squared is 4.
You get it? :)
Have a nice day!
Lester worked 12 hours last week at the grocery store and earned $93.00. If he continues to earn the same hourly pay, how many additional hours must he work to earn another $62.00?
A. 9 hours
B. 10 hours
C. 11 hours
D. 8 hours
Answer:
8 hours
Step-by-step explanation:
We can use a ratio to solve
12 hours x hours
---------- = ------------
93 dollars 62 dollars
Using cross products
12 * 62 = 93x
Divide each side by 93
12*62/93 = 93x/93
8 = x
8 hours
Let:T : ℝ3→ℝ3 be the transformation that projects each vector x=(x1,x2,x3)onto the plane
x2=0,
so
T(x)=(x1 ,0 ,x3). Show that T is a linear transformation.
The first property for T to be linear is
T(0) =_________________________________________________
Check if this property is satisfied for T.T(x1, x2, x3) =(x1, 0,x3)
T(0,0,0) = ( _____ ,_____, _,_______) ,
So, is the first property satisfied?
Yes 0r No
The second property for T to be linear is T(cu+dv)=______(see choices below)___________________________________________for all vectors(u and v)i n the domain of T and all scalars c, d
cT(u)+dT(v)
dT(u)+cT(v)dT(u)−cT(v)
cT(u)−dT(v)
for all vectors
u,
v in the domain of T and all scalars c, d.
Check if this property is satisfied for T. Let u=(u1, u2, u3) and v =(v1, v2, v3).
T(cu+dv)=(cu1+dv1, 0, cu3+dv3) =(cu1, _______, _________) +(dv1, ________, _________)
Factor out the scalar in each ordered triple.
T(cu+dv) = ____(u1, 0, u3) + ______(v1, 0,v3)
Further simplify the previous equation.
T(cu+dv) = c
▼
(choices pick one)
T(v)
T(u)+d
▼
(choices for the arrow above pick one)
T(v)
T(u)
So, is the second property satisfied?
Yes
No
Thus, T ▼
is
is not
linear.
Answer:
Step-by-step explanation:
A linear transformation must satisfy the following properties.
- T(0) = 0.
- For vector a,b then T(a+b) = T(a) + T(b).
- For a vector a and a scalar r, it must happen that T(ra) = rT(a)
In this case we have that T(a,b,c) = (a,0,c).
Note that T(0) = T(0,0,0) = (0,0,0) = 0. So, the first property holds.
Let [tex] a=(a_1,a_2,a_3), b=(b_1,b_2,b_3) [/tex]. Then
[tex]T(a+b) = T((a_1+b_1,a_2+b_2,a_3+b_3)) = (a_1+b_1,0,a_3+b_3) = (a_1,0,a_3)+(b_1,0,b_3) = T(a) + T(b)[/tex]
So the second property holds.
Finally, let r be a scalar and let [tex] a=(a_1,a_2,a_3)[/tex]. Then
[tex] T(ra) = T((ra_1,ra_2,ra_3)) = (ra_1,0,ra_3) = r(a_1,0,a_3)= rT(a)[/tex]
So, the three properties hold, and therefore, T is a linear transformation.
It is true that T represents a linear transformation
How to determine if T is a linear transformationA linear transformation is such that have the following properties
T(0) = 0.If u and v are vectors, then T(u+v) = T(u) + T(v).If u is a vector and r is a scalar, then T(ru) = rT(u)For the first property, we have:
T(x1,x2,x3) = (x1,0,x3)
The above property becomes
T(0) = T(0,0,0)
T(0) = (0,0,0)
T(0)= 0.
So, we can conclude that the first property of the linear transformation is satisfied
For the second property, we make use of the following:
u = (u1, u2, u3) and b = (v1,v2,v3)
The above property becomes
T(u + v) = T(u1 + v1, u2 + v2, u3 + v3)
Expand
T(u + v) = T(u1 + v1, 0, u3 + v3)
Expand
T(u + v) = (u1,0,u3) + (v1, 0, v3)
Simplify
T(u + v) = T(u) + T(v)
The above means that the second property is also satisfied
Recall that:
u = (u1, u2, u3)
So, we have:
T(ru) = (ru1, ru2, ru3)
Where r is a scalar
Expand
T(ru) = (ru1, 0, ru3)
Further, expand
T(ru) = r(u1, 0, u3)
So, we have:
T(ru) = rT(u)
The above means that, the third property is also satisfied
Hence, T represents a linear transformation
Read more about linear transformation at:
https://brainly.com/question/15213874
What is the center of the circle?
Answer:The point from which circle is drawn is called center of circle.
Step-by-step explanation:I don't say u must have to mark my ans as brainliest but if it has really helped u plz don't forget to thnk me...
Does coordinate s or coordinate t represent a greater number?
Answer:
t
Step-by-step explanation:
both t and s represent x axis value, t is greater as is on the right side from s
Answer: t
Step-by-step explanation: khan academy
The table shows the daily sales (in $1000) of shopping mall for some randomly selected days Sales 1.1-1.5 1.6-2.0 2.1-2.5 2.6-3.0 3.1-3.5 3.6-4.0 4.1-4.5 Days 18 27 31 40 56 55 23 Use it to answer questions 13 and 14. 13. What is the approximate value for the modal daily sales? A. $3,129.41 B. $2,629.41 C. $3,079.41 14. The approximate median daily sales is ... A. $3,130.36 B. $2,680.36 C. $3,180.36 D. $3,123.53 D. $2,664.29
Answer:
Step-by-step explanation:
From the question; we are given the following inclusive frequency distribution information
Class Frequency f
1.1-1.5 18
1.6-2.0 27
2.1-2.5 31
2.6-3.0 40
3.1-3.5 56
3.6-4.0 55
4.1-4.5 23
Convert the above inclusive frequency distribution to exclusive frequency distribution with respect of the upper and lower class limit ; we have:
Class Frequency f
1.05 - 1.55 18
1.55 - 2.05 27
2.05 - 2.55 31
2.55 - 3.05 40
3.05 - 3.55 56
3.55 - 4.05 55
4.05 - 4.55 23
Class Frequency f cf
1.05 - 1.55 18 18
1.55 - 2.05 27 45
2.05 - 2.55 31 76
2.55 - 3.05 40 116
3.05 - 3.55 56 172
3.55 - 4.05 55 227
4.05 - 4.55 23 250
n = 250
To determine the daily sales; we can derive that from estimated Mode by using the relation :
Estimated Mode = L + fm − fm-1(fm − fm-1) + (fm − fm+1) × w
here:
L = the lower class boundary of the modal group
fm-1 = the frequency of the group before the modal group
fm = the frequency of the modal group
fm+1 = the frequency of the group after the modal group
w = the group width
However;
It is easier now to determine the modal group (i.e the group with the highest frequency), which is 3.05 -3.55
L = 3.05
fm-1 =40
fm =56
fm+1 = 55
w = 0.5
∴[tex]mode = 3.05 + \dfrac{56 - 40 }{(56 - 40) + (56 -55)} * 0.5 \\ \\ mode = 3.05 + 0.4705 \\ \\ mode = 3.5205[/tex]
To find Median Class ; we use the formula;
Median Class = value of (n / 2)th observation
Median Class = value of (250 / 2)th observation
Median Class = value of 125th observation
From the column of cumulative frequency cf,
we will see that the 125th observation lies in the class 3.05-3.55.
∴ The median class is 3.05-3.55.
Thus;,
L=lower boundary point of median class =3.05
n=Total frequency =250
cf=Cumulative frequency of the class preceding the median class =116
f=Frequency of the median class =56
c=class length of median class =0.5
[tex]Median M=L+n2-cff- c \\ \\ =3.05+125-11656⋅0.5 \\ \\=3.05+0.08036 \\ \\ =3.13036[/tex]
hence median sales = $3130.36
Billy's age is twice Joe's age and the sum of their ages is 45. How old is Billy?
Answer:
30 years old
Step-by-step explanation:
Joe's age can be set to x. Since Billy is twice as old as Joe, his age can be set to 2x. They add up to 45. You can set up an equation, 2x+x=45.
Simplify the equation.
3x=45, x=15
Joe is 15. Billy is 2(15)=30.
please very soon I offer the crown !!! + 10 points urgently !!!
Answer:
For 90:
9 10p coins
7 10p coins and 1 20p coin
5 10p coins and 2 20 p coins
3 10p coins and 3 20p coins
For 60:
6 10p coins
4 10p coins and 1 20p coin
2 10p coins and 2 20p coins
3 20p coins
Step-by-step explanation:
Answer:
For 90 is having each containing both the 20 and10 for 2 boxes then the rest each a 20&10
For 60 is two 20s and two10
Step-by-step explanation:
Hope it helps
Determine whether the underlined number is a statistic or a parameter. In a study of all 1963 employees at a college, it is found that "40%" own a computer. Choose the correct statement below.
1. Parameter because the value is a numerical measurement describing a characteristic of a population
2. Statistic because the value is a numerical measurement describing a characteristic of a population
3. Statistic because the value is a numerical measurement describing a characteristic of a sample.
4. Parameter because the value is a numerical measurement describing a characteristic of a sample.
Answer:
1. Parameter because the value is a numerical measurement describing a characteristic of a population
Step-by-step explanation:
A parameter is a fixed measure which describes the whole population while a statistic is a characteristic of a sample (which is a portion of the target population).
In a study of all 1963 employees at a college, it is found that "40%" own a computer.
The study involved the entire population of employees in the college, therefore the result describes the computer owning characteristics of the whole population under study. It is therefore a parameter.
The correct option is 1.
If g(x) = 2x - 4), find the value of xf g(x) = 20. 12 points)
Answer:
x = 12
Step-by-step explanation:
g(x)= 2x-4
g(x)= 20
Therefore,
2x-4 = 20
Bringing -4 to the other side it becomes positive,so..
2x= 20+4
= 24
x =24/2
= 12
Consider the following.x = t − 2 sin(t), y = 1 − 2 cos(t), 0 ≤ t ≤ 8πSet up an integral that represents the length of the curve.8π0 dtUse your calculator to find the length correct to four decimal places.
The length of the parametric curve (call it C ) is given by
[tex]\displaystyle\int_C\mathrm ds=\int_0^{8\pi}\sqrt{\left(\frac{\mathrm dx}{\mathrm dt}\right)^2+\left(\frac{\mathrm dy}{\mathrm dt}\right)^2}\,\mathrm dt[/tex]
We have
[tex]x=t-2\sin t\implies\dfrac{\mathrm dx}{\mathrm dt}=1-2\cos t[/tex]
[tex]y=1-2\cos t\implies\dfrac{\mathrm dy}{\mathrm dt}=2\sin t[/tex]
Now,
[tex]\left(\frac{\mathrm dx}{\mathrm dt}\right)^2+\left(\frac{\mathrm dy}{\mathrm dt}\right)^2=5-4\cos t[/tex]
so that the arc length integral reduces to
[tex]\displaystyle\int_0^{8\pi}\sqrt{5-4\cos t}\,\mathrm dt[/tex]
which has an approximate value of 53.4596.
A type of friction that occurs when air pushes against a moving object causing it to negatively accelerate
Answer:
Air resistance
Step-by-step explanation:
Air resistance is a type of friction that occurs when air pushes against a moving object causing it to negatively accelerate
Answer:
Air resistance
Step-by-step explanation:
Air resistance is a type of friction that occurs when air pushes against a moving object causing it to negatively accelerate.
A commuter train travels 65 kilometers in 27 minutes. What is it’s speed in kilometers per hour?
Answer:
Per hour: 2.40740740741
Step-by-step explanation:
you have to divided 65 and 27 so
65/27
which is 2.40740740741
Suppose point (4, −9) is translated according to the rule (, ) → ( + 3, − 2). What are the coordinates of ′? Explain.
Please help
Answer:
(7, -11)
Step-by-step explanation:
If the point is shifted 3 to the right and 2 down, you just have to add 3 to the x-coordinate and subtract 2 from the y-coordinate. 4+ 3 = 7 and -9 - 2 is -11. So, the new point will be (7, -11).
Answer:
(7, -11)
Step-by-step explanation:
The point is translated three units to the right, and 2 units down.
[tex](4,-9)=>(4+3,-9-2)=>(7,-11)[/tex]
Point " ' " should be (7,-11)
How would I start this?
Answer:
(0, ∞)
Step-by-step explanation:
A good place to start is by visualizing what the graph looks like on a number line.
For x > 0, it is an open circle at x=0, and shading to the right extending to infinity.
__
So, the left end of the interval is 0, but 0 is not included in the interval.
The right end of the interval is infinity, but there is no such number, so "infinity" is not included in the interval.
"Not included" means you use round brackets ( ) for the corresponding end of the interval. ("Included" would mean you use square brackets [ ].)
So, the interval 0 < x < ∞ is written in interval notation as ...
(0, ∞)
Complete the transformation on the rectangle ABCD shown and choose the resulting vector: Use [ABCD]
edgen.
last option
The previous transformation could be classified as a
✔ reflection across the y–axis
.
Step-by-step explanation:
Answer:
D. [3, -1, -1, 3, 4, 4, 1, 1]
Reflection across the y–axis
Step-by-step explanation:
Please mark as Brainliest!
Identify which of the following is NOT equivalent to 2 3/4
Answer:
Step-by-step explanation:
mabey its c
The equation which is equivalent to [tex]2^{\frac{2}{3} }[/tex] will be equal to [tex]\sqrt[4]{2^3}[/tex]. Hence, option C is correct.
What is an arithmetic operation?The four basic mathematical operations are the addition, subtraction, multiplication, and division of two or even more integers.
Among them is the examination of integers, particularly the order of actions, which is crucial for all other mathematical topics, including algebra, data organization, and geometry.
As per the given information in the question,
[tex]2^{\frac{2}{3} }[/tex] = 1.68
Now, let's check the options,
A.
[tex](2^{\frac{1}{4} } )^{\frac{1}{2} }[/tex] = 1.09 ≠ 1.68, hence this is incorrect.
B.
[tex]2\frac{1}{4}*2\frac{1}{2}[/tex] = 9/4 × 5/2 = 5.625 ≠ 1.68, hence, this is incorrect.
C.
[tex]\sqrt[4]{2^3}[/tex] = 1.68 = 1.68, hence, this is correct.
D.
√8 = 2.82 ≠ 1.68, hence, this is incorrect.
To know more about arithmetic operations:
https://brainly.com/question/13585407
#SPJ5
Please answer this correctly
Answer:
662
Step-by-step explanation:
l x w
10x41
6x22
8x15
662
Use the following equation to answer the questions below:
y − 2 = 1 /3 (x + 4)
Find the equation of the line that is passing through (8, 2) and is perpendicular to the given line.
Answer:
Step-by-step explanation:I don't say u must have to mark my ans as brainliest but if it has really helped you plz don't forget to thank me...
NFL player Gerald Sensabaugh recorded a 46 inch standing vertical jump at the 2005 NFL Combine, at that time the highest for any NFL player in the history of the Combine. Sensabaugh weighed about 200 lb when he set the record. Part A What was his speed as he left the floor
Answer:
His speed as he left the floor is 4.83 m/s.
Step-by-step explanation:
Given: 46 inches = 1.1684 m and mass = 200 lb = 90.7185 Kg.
From the third equation of motion under free fall,
[tex]V^{2}[/tex] = [tex]U^{2}[/tex] - 2gs
Where; V is the final velocity (0), U is the initial velocity (unknown), g is the value of gravity - 10 m/[tex]s^{2}[/tex] and s is the distance = 1.1684 m.
Then;
0 = [tex]U^{2}[/tex] - 2gs
[tex]U^{2}[/tex] = 2gs
= 2 × 10 × 1.1684
= 23.368
⇒ U = [tex]\sqrt{23.368}[/tex]
= 4.8340 m/s
The initial velocity, U = 4.83 m/s.
Therefore, his speed as he left the floor is 4.83 m/s.
Answer:
His speed as he left the floor is 4.83 m/s.
Step-by-step explanation:
9. ABCD is a square and ABK is an equilateral triangle outside the square,
Find measurment of angle DKC
Answer:
< DKC = [tex]60^{0}[/tex]
Step-by-step explanation:
A square is a quadrilateral that has equal length of side. While an equilateral triangle is one with equal length of sides and equal values of angles.
Given square ABCD and that equilateral triangle ABK is outside the square, both figures share side AB. This shows that the length of the sides of the triangle is the same as the length of the side of the square.
i.e /AD/ = /CD/ = /BC/ = /AB/ = /AK/ = /KB/
Thus, < DKC = [tex]60^{0}[/tex] (property of angles in an equilateral triangle)
Identify the level of measurement of the data, and explain what is wrong with the given calculation. In a survey, the favorite sports of respondents are identified as 100 for basketball comma 200 for baseball comma 300 for football comma and 400 for anything else. The average (mean) is calculated for 597 respondents and the result is 256.1 .The data are at the _________________
level of measurement.
Answer:
The data are at the Nominal level of measurement.
The given calculation is wrong because average (mean) cannot be calculated for nominal level of measurement.
Step-by-step explanation:
The objective here is to Identify the level of measurement of the data, and explain what is wrong with the given calculation.
a)
The data are at the Nominal level of measurement due to the fact that it portrays the qualitative levels of naming and representing different hierarchies from 100 basketball, 200 basketball, 300 football, 400 anything else
b) We are being informed that, the average (mean) is calculated for 597 respondents and the result is 256.1.
The given calculation is wrong because average (mean) cannot be calculated for nominal level of measurement. At nominal level this type of data set do not measure at all , it is not significant to compute their average (mean).
simplify 2x+x+x+2y times 3y times y
Answer:
12 x y² + 6 y³
Step-by-step explanation:
Step(i):-
Given ( 2 x + x + x + 2 y ) times 3 y times y
( 2 x + x + x + 2 y ) × 3 y × y = ( 4 x + 2 y) × 3 y × y = ( 4 x + 2 y) 3 y²
By applying Distributive property
( a + b ) c = a . c + b . c
= 4 x . 3 y² + 2 y . 3 y²
= 12 x y² + 6 y³
Final answer:-
( 2 x + x + x + 2 y ) times 3 y times y = 12 x y² + 6 y³
Two airplanes leave an airport at the same time, flying in the same direction. One plane is flying at twice the speed of the other. If after 4 hours they are 1800 km apart, find the speed of each plane.
Answer:
The slower plane has a speed of 450 km/h and the faster one has a speed of 900 km/h.
Step-by-step explanation:
Two planes:
The first one's speed is x
The second is y.
One plane is flying at twice the speed of the other.
I will say that y = 2x.
Two airplanes leave an airport at the same time, flying in the same direction
Same direction, so their relative speed is the subtraction of their speeds. 2x - x = x.
Means that after 1 hour, they will be x miles apart.
If after 4 hours they are 1800 km apart, find the speed of each plane
After 1 hour, x km apart. After 4, 1800. So
1 hour - x km apart
4 hours - 1800 km apart
4x = 1800
x = 1800/4
x = 450
2x = 2*450 = 900
The slower plane has a speed of 450 km/h and the faster one has a speed of 900 km/h.
Does the frequency distribution appear to have a normal distribution? Explain. Temperature (degreesF) Frequency 35 dash 39 1 40 dash 44 4 45 dash 49 9 50 dash 54 13 Temperature (degreesF) Frequency 55 dash 59 9 60 dash 64 2 65 dash 69 1 Choose the correct answer below. A. No, because the frequencies start low, proceed to one or two high frequencies, then decrease to a low frequency, and the distribution is not symmetric. B. No, because the frequencies start low, proceed to one or two high frequencies, then decrease to a low frequency, and the distribution is approximately symmetric. C. Yes, because the frequencies start low, proceed to one or two high frequencies, then increase to a maximum, and the distribution is not symmetric. D. Yes, because the frequencies start low, proceed to one or two high frequencies, then decrease to a low frequency, and the distribution is approximately symmetric.
Answer:
D. Yes, because the frequencies start low, proceed to one or two high frequencies, then decrease to a low frequency, and the distribution is approximately symmetric.
Step-by-step explanation:
Hello!
The given frequency distribution for temperatures.
To see if the distribution appears to have a normal distribution you have to draw a histogram using the information. Check attachment.
As you can see, the distribution appears symmetric, it starts low and proceeds to grow until it reaches its maximum point (f(4)=13) and then starts to decrease to low frequencies. The right tail decreases a little more than the left one but it is almost symmetrical.
I hope this helps!
Laura placed a bucket of water in her garden. Over the course of a week, she watched the water evaporate and recorded the volume of water left in the bucket each day.
Laura found the linear model that best fit the data was V=5.00−0.25n, where n is the number of days since she first placed the bucket and V is the volume of water, in liters, remaining in the bucket.
How many liters of water evaporated from the bucket every day?
How may liters where inside the bucket when Laura first placed it in the garden?
Answer:
1. 0.5 L; 2. 5.00 L
Step-by-step explanation:
V = 5.00 - 0.5n
If you include units, the equation becomes
V(in litres) = 5.00 L - (0.5 L/day) × (n days)
1. Rate of evaporation
When you include the units, it becomes easier to see that the water is evaporating at a rate of 0.5 L/day.
That is, 0.5 L of water evaporates each day.
The negative sign shows that the volume of water is decreasing.
2. Volume at the beginning
At the beginning of the experiment, n = 0. Then
V = 5.00 -0.5×0 = 5.00 - 0 = 5.00 L
The bucket originally contained 5.00 L of water.
Bonnie volunteers to bring bags of candy to her child's class for the Halloween party. She buys a bag containing 240, a bag containing 624, and a bag containing 336 pieces. Age needs to use all the candy to create identical treat bags. How many treat bags can bonnie make so that each one has the same number and variety of candy? How many of each type of candy will be in each bag?
Answer:
Number of bags that Bonnie can make so that each one has the same number of candies = 48
Number of candies from bag I in each of the treat bag = 5
Number of candies from bag II in each of the treat bag = 13
Number of candies from bag III in each of the treat bag = 7
Step-by-step explanation:
Given: One bag (I) has 240 candies, one bag (II) has 624 candies and one bag (III) has 336 candies
To find: Number of bags that Bonnie can make so that each one has the same number of candies and number of each type of candies in each bag
Solution:
[tex]240=2^4\times 3\times 5\\624=2^4\times3\times13\\336=2^4\times3\times7[/tex]
Highest common factor (H.C.F) = [tex]2^4\times3=48[/tex]
So,
Number of bags that bonnie can make so that each one has the same number of candies = 48
Now,
[tex]\frac{240}{48}=5\\ \frac{240}{48}=13\\\frac{240}{48}=7[/tex]
Number of candies from bag I in each of the treat bag = 5
Number of candies from bag II in each of the treat bag = 13
Number of candies from bag III in each of the treat bag = 7